31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
+607-8616871
+607-8614278
AUZANA
- Industrial Adhesive
- Technomelt- Low Pressure Molding
- Pre-Applied Process (Coating)
- Loctite Equipment
- Dispense Accessories
- Impregnation Process (Porosity Sealing)
- Corrugated Packaging Products
- Automation
- Henkel Bergquist Thermal Management Materials
- Other Products
Auzana Group
31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
EQ PU20 Digital Peristaltic Dispenser
EQ PU20 Digital Peristaltic Dispenser
EQ PU20 Digital Peristaltic Dispenser
The LOCTITE® EQ PU20 Digital Peristaltic Dispenser is a reliable and effective volumetric dispenser for single-component, low viscosity adhesives. It is great for precise dosing or applications that require a specific flow rate. This Dispenser is electro-mechanically operated and does not require the use of an air source. It transfers liquids via pressure displacement applied by rotor turning against a tube that carries the material from the bottle to a handheld dispense valve.This Dispenser provides volumetric dispensing of non-thixotropic materials such as cyanoacrylates, anaerobics, UV products, or solvents up to a viscosity of 5,000 cPs. It can be used as a manual or semi-automatic workstation.
PRODUCT FEATURES:
- Air-free dispensing eliminates air in product.
- Forward and reverse motion of rotor.
- Instant reverse for vacuum suck-back; shuts off the flow of liquid and prevents dripping
- Adjustable post-delay time for vacuum setting.
- Simple and convenient load mechanism provides for easy cleaning.
- Continuous or timed mode of dispense.
- Large digital LED display
- Includes four (4) different feedline tubing sizes to accommodate various product viscosities.
- Dispenses from any size container since the feedline is placed directly into the bottle of adhesive.
- Virtually no wasting of adhesive since it travels from the product bottle, thru the feedline tubing, and onto the part.
- No flushing of dispense valve required
- No downloading of adhesive required - just place the feedline into the original bottle.
TECHNICAL DATA:
- Power Supply: 110 / 220 VAC; 50/60 Hz.
- Power Consumption: 0.3 amps
- Dispense time range: 0.01 to 99.9 seconds
- Rotor Speed: Up to 120 rpm
- Maximum Flow Rate: Up to 6 ml. per minute
- Minimum Drop Size: 0.001 ml.
- Direction of rotation: Clockwise (CW) or Counterclockwise (CCW)
- Dimensions: 8.4 inches W x 3.5 inches H x 7.5 inches D
- Weight: 6.6 lbs.
- Suck-back: Programmable by reversing the direction of rotor.
- Highly focused light wavelength