31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
+607-8616871
+607-8614278
AUZANA
- Industrial Adhesive
- Technomelt- Low Pressure Molding
- Pre-Applied Process (Coating)
- Loctite Equipment
- Dispense Accessories
- Impregnation Process (Porosity Sealing)
- Automation
- Henkel Bergquist Thermal Management Materials
- Other Products
Auzana Group
31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
Loctite 680
| Previous | 16 / 30 | Next |
Loctite 680 50ml Bottle, IDH:1800575
High strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required.
LOCTITE® 680 is a green, high strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product prevents loosening and leakage from shock and vibration. It provides robust curing performance. It works on active metals (e.g. mild steel) and on passive substrates (e.g. stainless steel and plated surfaces).
High strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required.
LOCTITE® 680 is a green, high strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product prevents loosening and leakage from shock and vibration. It provides robust curing performance. It works on active metals (e.g. mild steel) and on passive substrates (e.g. stainless steel and plated surfaces).
- -Low viscosity
- -Provides robust curing performance
- -Cures when confined in the absence of air between close fitting metal surfaces
- -Offers high temperature performance and oil tolerance
- -Tolerates minor surface contaminations from various oils
- -Certified to ANSI/NSF Standard 61 for use in commercial and residential potable water systems not exceeding +179.6 °F (+82 °C)
Technical Information
| Agency Approvals / Specifications | CFIA Listed, NSF/ANSI 61 |
| Application Method | Pressure |
| Applications | For Loose Fitting Parts, For Slip Fitted Parts, Retaining |
| Color | Green |
| Cure Type | Anaerobic Cure |
| Diametrical Clearance (Maximum) Unit | in. |
| Fixture Time | 4 min. |
| Fixture Time Temperature | 4 °C |
| Full Cure Temperature | 22 °C |
| Full Cure Time | 24 hr. |
| Gap Fill | 0.015 in. |
| Key Characteristics | Fluorescent, Oil Tolerant, Primerless, Strength: High Strength |
| Number of Components | 1 Part |
| Physical Form | Liquid |
| Shear Strength Unit, Steel | psi |
| Shear Strength, Steel | 4000 |
| Specific Gravity | 1.1 g/l |
| Specific Gravity Temperature | 25 °C |
| Substrates | Metal |
| Technology | Acrylic |
| Temperature | -65 - 300 °F |
| Viscosity | 1250 mPa.s (cP) Brookfield |
| Viscosity (#7sp/20/rpm) | 1250 mPa.s (cP) Brookfield |
| Viscosity Temperature | 25 °C |